Liquid Crystal Operating Principles
Meadowlark Optics DOWNLOAD PRINCIPLES Liquid Crystal Variable Retarders are solid
Key Features
These products all use nematic liquid crystal materials to electrically control polarization. Meadowlark Optics standard liquid crystal products provide tunable retardation by changing the effective birefringence of the material with applied voltage, thus altering the input polarized light to any chosen elliptical, linear or circular polarization.
Our precision Liquid Crystal Variable Retarders require unique fabrication and assembly steps. We construct these retarders using optically flat fused silica windows coated with our transparent conductive Indium Tin Oxide (ITO). Our ITO coating is specially designed for maximum transmission from 450 – 1800 nmRetarder Material: Nematic liquid crystal
Substrate Material: Optical quality synthetic fused silica
Transmitted Wavefront Distortion (at 632.8 nm): ≤λ/4
Surface Quality: 40 – 20 scratch‐dig
Beam Deviation: ≤ 2 arc min
Reflectance (per surface): ≤ 0.5 % at normal incidence
Dimensional Tolerance: ± 0.005 in.
Temperature Range: 0 °C to 50 °C
Recommended Safe Operating Limit:
500 W/cm², CW
300 mJ/cm², 10 ns, visible
Item # | Size | Optimized Wavelength | Wavelength Range | Clear Aperture | Thickness | Lead Time | Price | Add to cart |
---|---|---|---|---|---|---|---|---|
LVR-100-VIS | 1.000 in. (25.40 mm) | 700 | 405-700 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $968.00 | |
LVR-100-IR1 | 1.000 in. (25.40 mm) | 950 | 650-950 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $968.00 | |
LVR-100-IR2 | 1.000 in. (25.40 mm) | 1250 | 900-1250 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $968.00 | |
LVR-100-IR3 | 1.000 in. (25.40 mm) | 1700 | 1200-1700 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $968.00 | |
LVR-200-VIS | 2.000 in. (50.80 mm) | 700 | 405-700 | 0.700 in. (17.8 mm) | 0.750 in. (19.05 mm) | 1 - 2 Days | $1,158.00 | |
LVR-200-IR1 | 2.000 in. (50.80 mm) | 950 | 650-950 | 0.700 in. (17.8 mm) | 0.750 in. (19.05 mm) | 1 - 2 Days | $1,158.00 | |
LVR-200-IR2 | 2.000 in. (50.80 mm) | 1250 | 900-1250 | 0.700 in. (17.8 mm) | 0.750 in. (19.05 mm) | 1 - 2 Days | $1,158.00 | |
LVR-200-IR3 | 2.000 in. (50.80 mm) | 1700 | 1200-1700 | 0.700 in. (17.8 mm) | 0.750 in. (19.05 mm) | 1 - 2 Days | $1,158.00 | |
LRC-100-VIS | 1.000 in. (25.40 mm) | 700 | 405-700 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $1,221.00 | |
LRC-100-IR1 | 1.000 in. (25.40 mm) | 950 | 650-950 | 0.370 in. (9.4 mm) | 1.230 in. (31.24 mm) | 1 - 2 Days | $1,221.00 |
A thin dielectric layer is applied over the ITO and gently rubbed, to provide for liquid crystal molecular alignment. Two windows are then carefully aligned and spaced a few microns apart. The cavity is filled with birefringent nematic liquid crystal material. Electrical contacts are attached and the device is environmentally sealed. We carefully place the Liquid Crystal Variable Retarder in an anodized aluminum housing such that the fast and slow axes are both at 45° relative to a convenient mounting hole.
Anisotropic nematic liquid crystal molecules from uniaxial birefringent layers in the liquid crystal cell. An essential feature of nematic material is that, on average, molecules are aligned with their long axes parallel, but with their centers randomly distributed. With no voltage applied, the liquid crystal molecules lie parallel to the glass substrates and maximum retardation is achieved.
When voltage is applied, liquid crystal molecules begin to tip perpendicular to the fused silica windows. As voltage increases, molecules tip further causing a reduction in the effective birefringence and hence, retardance. Molecules at the surface, however, are unable to rotate freely because they are pinned at the alignment layer. This surface pinning causes a residual retardance of ~ 30 nm even at high voltage (20 volts).
We achieve zero (or any custom) retardance with a subtractive fixed polymer retarder, called a compensator, attached to the liquid crystal cell. Negative retardance values are sometimes preferred, for example, when converting between right- and left-circularly polarized states. Placing a compensated Liquid Crystal Variable Retarder between two high extinction polarizers creates an excellent optical attenuator, with convenient electronic control.
As with any anisotropic material, retardance is dependent upon thickness and birefringence. Liquid crystal material birefringence depends on operating wavelength, drive voltage and temperature. The overall retardance of a liquid crystal cell decreases with increasing temperature (approximately -0.4% per °C).
Response Time
Liquid Crystal Variable Retarder response time depends on several parameters, including layer thickness, viscosity, temperature, variations in drive voltage and surface treatment. Liquid crystal response time is proportional to the square of the layer thickness and therefore, the square of the total retardance.
Response time also depends upon direction of the retardance change. If the retardance increases, response time is determined solely by mechanical relaxation of the molecules. If retardance decreases in value, response time is much faster due to the increased electric field across the liquid crystal layer. It takes about 5 ms to switch from one-half to zero waves (low to high voltage) and about 20 ms to switch from zero to one-half wave (high to low voltage).
Response time improves by using custom materials with high birefringence and a thinner liquid crystal layer. At higher temperature, material viscosity decreases, also contributing to a faster response.
Another technique involves the Transient Nematic Effect (TNE) to improve response times. With this drive method, a high voltage spike is applied to accelerate the molecular alignment parallel to the applied field. Voltage is then reduced to achieve the desired retardance.
When switching from low to high retardance all voltage is momentarily removed to allow the liquid crystal molecules to undergo natural relaxation. Out Four Channel Digital Interface conveniently provides the necessary TNE voltage profiles.
Our standard Liquid Crystal Variable Retarders provide a minimum retardance range of ~30 nm to at least half-wave at the specified wavelength. With an attached compensator, retardance is guaranteed to range from zero to at least half-wave at the specified wavelength. Custom retardance ranges (up to a few waves) and custom compensators are available. Contact our sales department to discuss your requirements.
Each Liquid Crystal Variable Retarder is supplied with retardance versus voltage performance data for your specified wavelength. A coaxial cable with mating connector is provided for easy attachment to one of our electronic controllers.
Liquid crystal devices should be electrically driven with an AC waveform with no DC component to prevent ionic buildup which can damage the liquid crystal layer. We require a 2 kHz square wave of adjustable amplitude for controlling our Liquid Crystal Variable Retarders (LCVR). Our Basic Controller and Four Channel Interface ensure these drive requirements are met. A temperature sensing and control option can be added to our LCVRs for accurate controlling of the operating temperature. The sensor is attached directly to the LCVR substrate, outside its clear aperture. Without this option, retardance decreases by approximately 0.2% to 0.3% per °C increase in temperature.
SPECIFICATIONS | |
Retarder Material | Nematic liquid crystal |
Substrate Material | Optical quality synthetic fused silica |
Wavelength Range | 450 – 1800 nm (specify) |
Retardance Range | |
Without Compensator With Compensator | ~ 30 nm to λ/2 0 to λ/2 (Custom ranges are available) |
Transmitted Wavefront Distortion (at 632.8 nm) | ≤ λ/4 |
Surface Quality | 40 – 20 scratch-dig |
Beam Deviation | ≤ 2 arc min |
Reflectance (per surface) | ≤ 0.5 % at normal incidence |
Diameter Tolerance | ± 0.005 in. |
Temperature Range | 0 °C to 50 °C |
Recommended Safe Operating Limit | 500 W/cm², CW 300 mJ/cm², 10 ns, visible |
ORDERING INFORMATION |
|||
Diameter, D (in.) |
Clear Aperture, CA (in.) |
Thickness, t (in.) |
Part Number |
Without Attached Compensator (30 nm to λ/2) |
|||
1.00 |
0.37 |
1.23 |
LVR – 100 |
2.00 |
0.70 |
0.75 |
LVR – 200 |
3.00 |
1.60 |
1.00 |
LVR – 300 |
With Attached Compensator (0 nm to λ/2) |
|||
1.00 |
0.37 |
1.23 |
LRC – 100 |
2.00 |
0.70 |
0.75 |
LRC – 200 |
3.00 |
1.60 |
1.00 |
LRC – 300 |
Meadowlark Optics DOWNLOAD PRINCIPLES Liquid Crystal Variable Retarders are solid
There is no excerpt because this is a protected post.
There is no excerpt because this is a protected post.
The Power and Limitations of Polymers and Liquid Crystals for